Your EDC Knife Recommendations
Cjrb maleah Folding Utility Blade
Specs: blade length 2.39”, closed length 3.14”, overall length 5.51”, weight 2.29oz Details: CJRB Maileah (J1918) is a small folder that easily fits into men’s or women’s jeans pocket, has a G10 handle, that was built with EDC and utility in mind. The stainless steel blade has a thumb stud for easy deployment, and the tip was designed for everyday tasks like detailed carving, trimming or scoring. The Maileah also has the option of a deep pocket reversable clip. *AR-RPM9 steel is a proprietary steel buy Artesian Cutlery, to increase their offerings with this new performance steel. AR-RPM9 is a budget steel with a hardness of 59-61 HRC, that Artisan Cutlery hopes will elevate their blades to the next level and able to compete with better performers. This new steel is made through a powder metallurgy process, and it allows a fine grain structure that prevents corrosion, maintains its edge…
Read More
CJRB Ria w/G10 handle
Specs: blade 2.95”, overall length 6.86”, weight 2.12 oz Details: The CJRB with it’s G10 scales and it’s 12C27 drop point blade provides a classic gentleman’s folder look without sacrificing it’s carry ability and functionality. The compact design is ideal for daily tasks and the full-flat ground blade.has an exceptional cutting profile. Smooth blade deployment is achieved through ceramic ball bearings, allowing easy one handed operation. The Ria also has a deep carry pocket clip, and a lanyard hole, providing multiple carry options. If you’re looking for a clean sleek look with the toughness EDC tasks can demand, the CJRB Ria is your pick. *Sandvik 12C27 is a high-end performance steel, with a hardness range of 54-61HRC. The composition of 12C27 is finer allowing a tighter carbide microstructure giving this steel the ability to achieve a razor sharp edge and has good corrosion resistance properties. The CJRB Ria w/G10 handle…
Read More
CRKT Homefront EDC Field Strip (K250KXP)
The CRKT Homefront EDC Field Strip (K250KXP) is the perfect knife for outdoor enthusiasts who want a knife that can be used in practically any situation. The knife features a 3-1/8″ drop point blade made from 8Cr13MoV stainless steel, which means it’s super tough and won’t rust or corrode in wet conditions. The blade also has a black oxide finish to help protect against corrosion. If you’re looking for a knife that’s ready to go at all times, this one comes with an emergency whistle attached to the lanyard hole, so you can let your friends know where you are if they get lost or separated. The Homefront EDC Field Strip is also equipped with an oversized thumb stud so it’s easy to open with one hand—even when wearing gloves or while fumbling around in the dark. The handle of this knife is made from glass-filled nylon that provides a…
Read More
Gerber 06 Fast Knife
Specs: blade 3.75”, closed 4.8”, overall length 8.75”, weight 5.7 oz Details: The Gerber 06 FAST (Forward Action Spring Technology) flies into operation with the flip of a switch. The S30V premium stainless tanto blade was designed for thrusting and slashing, while the semi-serration aides in cutting and ripping, with the G-10 scales giving added grip, even when wet. The black oxide coating provides extra protection against abuse and the harsh elements. (The Gerber 06 Auto also comes in a plain edge drop point, and partially serrated drop point.) *CPM-S30V steel is a martensitic steel designed to offer the best combination for toughness, wear, and corrosion resistance. It offers an improvement in toughness and has equal or better corrosion resistance than 440C in different environments. The Gerber 06 Fast Knife is a tactical knife with a sleek design and compact size. This knife features F.A.S.T. forward action spring technology that…
Read More
Gerber Ghoststrike Fixed Blade w/ankle wrap
Specs: overall length 6.9”; blade 3.3”, weight 3.6oz Details: Gerber ghost strike fixed blade with ankle wrap. Compact blade with a skeletal steel 420HC frame. Coated in black ceramic to reduce reflection and corrosion. Blade designed for concealed or open carry. Knife comes with a neoprene ankle wrap and the sheath that can be mounted vertically or horizontally on a belt or pack, and the handle has diamond texture for enhanced grip. *420HC (HC stands for ‘high carbon’) is made harder that regular 420. It is used extensively by Buck and Gerber for their knives, and is a mid-level steel.
Read More
Gerber Quadrant – Straight Edge w/pocket clip
Specs: 2.7” blade, 4” closed length, weight 4.5oz, Details: Gerber Quadrant straight edge w/ bamboo handle scales. This small EDC had a right handed pocket clip folding sheep foot blade, able to handle daily tasks. Deploying the blade is made easy with the design of the finger ‘flipper’. Made for style and utility. *7Cr17Mov is a Chinese steel GB standard martensitic stainless steel grade with a small amount of molybdenum (Mo) and vanadium (V), to improve hardness and wear resistance. Similar steels would be US AISI 440A in Japanese SUS 440A.
Read More
Hogue X1 Microflip
Specs: blade 2.75”, overall length 6.625”, weight 3.2 oz Details: The Hogue X1 Microflip adds comfortable EDC to a tough and reliable folder that is capable of lighting fast deployment with the flip of a finger. The frame is constructed of a hard coat anodized 6061-T6 aluminum and designed for a natural and comfortable ergonomic grip, and easy one handed opening. The stout and sturdy plunge lock adds to the ease of single handed operation. The X1 also sports a drop point blade made of CPM154 stone washed performance stainless steel. The X1 Microflip also provides the option of a removable ambidextrous pocket clip. The Hogue X1 Microflip knife is an excellent choice for those looking for a compact, reliable folding knife. The blade is made from high-quality stainless steel that holds an edge well and is easy to sharpen. CPM154 is a Martensitic stainless steel with a hardness rated…
Read More
KA-BAR Dozier Folding Hunter
Specs: blade 3.0”, overall length 7.25”, weight 2.4 oz Details: KA-BAR Dozier Folding Hunter (4062FG) is a lightweight lock back with a curved diamond textured Zytel handle to conform to the hand. This knife is all about the K.I.S.S. method of keeping things simple. The hollow ground drop point blade is made from strong AUS-8A stainless steel. The Dozier’s reversible pocket clip and thumb stud gives the versatility desired for left and right handed users. This knife is a great option for a light and durable EDC. *AUS-8A is very similar to a AUS-8 and sometimes referred to as the same. The difference between the 8A and 8 is heat treatment. AUS-8A a stainless steel with low carbon content that resists rust and easily sharpens. AUS-8A and AUS-8 are very similar to the USA’s 440 line of steels. AUS steel is made both in China and by the Japanese. Hardness…
Read More
KA-BAR TDI Law
Specs: blade length 2.3125”, overall is 5.625”; weight 6.4oz Details: Ka-Bar TDI developed as an extreme close quarter weapon, placing this fixed blade in a position as a ‘last option’ alternative. Designed for open or concealed carry. Has drop point blade with plain edge. (Available in serrated.) Comes with black glass filled nylon sheath. *AUS-8A is very similar to a AUS-8 and sometimes referred to as the same. The difference between the 8A and 8 is heat treatment. AUS-8A a stainless steel with low carbon content that resists rust and easily sharpens. AUS-8A and AUS-8 are very similar to the USA’s 440 line of steels. AUS steel is made both in China and by the Japanese.
Read More
Kershaw Bareknuckle
Specs: blade 3.5”, handle length 4.70”, overall length 8.20”, weight 3.55 oz Details: The Kershaw Bareknuckle is a revived design of the popular ZT 0777, but with a slimmed down profile. The matte grey 6061-T6 aluminum contains the patented sub-frame lock for a reliable and secure lock up. The Sandvik 14C28N steel is durable enough to retain an edge, while still being easy to sharpen. The Bareknuckle is also equipped with a reversable deep carry tip up pocket clip. The flipper deployed stonewashed modified drop point blade gives you a mix of belly cut and slicing, and for self defense jabbing and slashing. The Kershaw Bareknuckle is an attractive EDC able to handle most anything you throw at it. *14C28N is a stainless steel made by the Swedish company @Sandvik, and it’s mainly made for knives. It is high in Chromium giving it great corrosion resistance, and offers good edge…
Read More
Kershaw Shuffle
Specs: 5.75” x 1.33” x 1.5”, blade length 2.4”, weight 3.5oz Details: Kershaw Shuffle compact is multi functional pocket knife that includes a Phillips and flathead bit, a bottle opener, and a lanyard hole and a single fixed position removable pocket clip drop point blade is stainless steel and black coated to prevent corrosion. It has a linerlock prevent closing prematurely. Handle material is glass thread nylon polymer reinforced. *8Cr13Mov is a Chinese steel has similar characteristics to AUS-8. Excellent steel for the money, and is found in a lot of high value knives.
Read More
Leatherman FREE T4 Multitool
Specs: blade 2.2”, closed 3.6”, weight 4.3oz The Leatherman FREE T4 Multitool is for the adventurer in you. It’s not just a knife, it’s an instrument that will help you take on the world. The FREE T4 Multitool comes with a locking blade, pliers, wire cutters, crimper, can opener/small screwdriver bit driver, bottle opener/large screwdriver bit driver, and a large cutting hook/scraper. It also comes with a sheath and carabiner so you can clip it to your belt loop or backpack and keep it at-the-ready for when you need it. It’s the perfect tool for camping trips and outdoor excursions—when you’re out there on your own or with a group of friends, this knife will help you get through anything! *420HC steel is softer than higher steel count 440, yet more durable than other similar metals. It is strong and reliable, and ideal for sporting/utility tools. Its composition is 13.0%…
Read More
Morakniv Garberg Full Tang Fixed Blade
Specs: fixed full tang blade 4.3”; overall length 9.0”; weight 9.6oz Details: Morakniv Garberg is made of black carbon steel (full tang), with a Scandi grind blade, which makes the knife easier to keep sharpened. This blade was designed to take a beating, and stand up to the toughest challenges. The knife also comes with two sheath options, either black leather, or a multi mount functional solution. (The spine on this blade has been ground for easier use with fire starter.) *Carbon Steel is highly susceptible to rust and stains if not taken care of, but the blade allows you to easily use flint and the spine of the blade to start your fire, or use as a ferro striker, and is easily sharpened out in the field.
Read More
Nitecore NTK10 Titanium Utility Knife
The Nitecore NTK10 Titanium Utility Knife is a multipurpose tool that is made from Aero grade Titanium alloy, and provides the user a retractable and replaceable razor sharp OLFA blade with a 30° angled cut, glass breaker, and bottle opener. The Nitecore titanium body has a lanyard hole for neck carry, and also comes with a detachable pocket clip. This small lightweight package offers both functionality and versatility. Weighing in at 2.38oz this knife will be your go-to companion when you need to cut through any material with ease or break out of your car window if you ever find yourself trapped inside after an accident. This knife is shaped like a Swiss army knife but with more functions such as the bottle opener and glass breaker. It also has a replaceable OLFA blade which can be used in various situations such as cutting rope or string, slicing open packages…
Read More
Ontario Knife Rat-1 Knife
Specs: blade length 3.6”, overall open length 8.62”, closed 5”, 5.57oz Details: Ontario Knife Rat-1 is a quality tactical and survival knife that can withstand abuse in most any environment. It has a smooth action, solid lock up, and ergonomic handle. For the price, it’ll be a challenge to find a knife that compares to the performance of the Rat-1. It also has a four position pocket clip and dual thumb studs, that allows the wearer to customize it to their specific use and preferred carry method. *AUS 8 is a Japanese stainless steel (also produced in China) and is very similar to 440 but with more vanadium added to give additional hardness. AUS 8 is at the higher end of the medium quality steel and is favored for it’s cost effectiveness and corrosion resistance. Hardness is rated 57-59RC.
Read More
Outdoor Edge RazorLite
Specs: replaceable blade 3.5”, overall 8.0”, weight 2.8 oz. Details: The Outdoor Edge is the perfect EDC for those that would rather spend more time hunting than sharpening their blade. The Edge houses a replaceable razor sharp drop point blade that is suitable for cleaning and processing wild game, or just your everyday task of opening boxes or cutting zip ties. The handles are a fiberglass/nylon polymer mix, and house a stainless steel pocket clip. The black blade housing is oxide coated and is easily deployed using the ambidextrous thumb studs. The Outdoor edge is a lightweight EDC that gives you the option of having quick access to a razor sharp blade in a moments notice. *Replaceable blades made from Japanese 420J2 steel
Read More