Your EDC Knife Recommendations

Eafengrow EF121 Fixed Blade

Attributes: - - - - - - - - - - - - - -

Specs: blade 3.42”, handle 3.5”, overall length 6.93”, weight 8.0 oz Details: Eafengrow EF121 with D2 steel and ergo anti-slip secure G10 grip scales is a high quality fixed blade knife, ideal for hunting, fishing, camping, or any other EDC task you might face.  The stonewashed D2 steel gives you remarkable durability and edge retention, and paired with the multi-positional kydex sheath, makes the EF121 an excellent choice for all EDC needs. *D2 steel is an air hardened, high chromium, high carbon composition designed for extreme wear and corrosion resistance. D2 hardness is measured around 55-62HRC. One of the most notable features of the EF121 is its ergonomic handle, which is made from G-10 composite material. This provides a comfortable and secure grip in the hand, even when the knife is being used for extended periods of time. The handle also has a textured surface to improve grip and prevent…

Read More

ESEE Izula 2

Attributes: - - - - - - - - - - - - -

Specs: blade length 2.63”, Overall length 6.75”, weight (knife only) 3.2oz Details: The Izula 2 was designed to be a workhorse while also being lightweight and concealable. The Izula II versus the Izula is a 1/2 inch difference with a longer handle and full canvas Micarta scales. The Izula II has a black injection-molded polymer sheath with an ambidextrous clip. *1095 is high carbon steel is designed for hard use but will stain and rust if not cared for.

Read More

ESEE PR4-Black Oxide

Attributes: - - - - - - - - - - -

Specs: blade 4.19”, overall length 8.9”, 1/8” thick, weight (knife only) 6.3oz Details: ESEE (Camp-Lore) PR4-BO (Camp-Lore) is a black oxide spear point fixed blade that is a straight forward design by ESEE, and it’s built like tank, and capable of handling all of your backpacking, camping, off trail and hiking needs. The PR4 has a 90 degree spine for more effective ferro striking, and batoning. What the blade lacking in beauty, it most definitely makes up for in effectiveness. Comes with a dark tan sheath. *1095 is a high carbon steel is designed for hard use, but will stain and rust if not cared for.

Read More

KA-BAR TDI Law

Attributes: - - - - - - - - - - - - - - - -

Specs: blade length 2.3125”, overall is 5.625”; weight 6.4oz Details: Ka-Bar TDI developed as an extreme close quarter weapon, placing this fixed blade in a position as a ‘last option’ alternative.  Designed for open or concealed carry. Has drop point blade with plain edge. (Available in serrated.) Comes with black glass filled nylon sheath. *AUS-8A is very similar to a AUS-8 and sometimes referred to as the same. The difference between the 8A and 8 is heat treatment.  AUS-8A a stainless steel with low carbon content that resists rust and easily sharpens.  AUS-8A and AUS-8 are very similar to the USA’s 440 line of steels. AUS steel is made both in China and by the Japanese.

Read More

Knives Ranch Handmade Damascus fixed blade

Attributes: - - - - - - - - - -

Specs: blade length 3”, overall length 6” If you’re looking for a knife that will stand out both in your collection and on the job, then look no further than the Knives Ranch Handmade Damascus fixed blade. This knife is handcrafted from high-quality steel, making it extremely durable—and it’s also lightweight, so you’ll hardly even notice it’s there when you’re using it. But don’t let its lightness fool you: this knife can hold its own in any situation. It comes with a full tang design, which means that the blade is fully embedded into the handle and runs through to the end of the handle. This makes it much stronger than other knives of similar design, so you can rely on this knife as an everyday tool without worrying about it breaking or bending under pressure. Plus, because it’s made from high-quality steel and has excellent balance, this knife will…

Read More

Ottoza Tracker – Handmade Damascus

Attributes: - - - - - - - - - - -

Specs: overall length 10” (5” blade with 5” handle), weight (w/sheath) 1.23lbs Details: Handcrafted Ottoza Damascus tracker fixed blade with bone handle. Comes with a right hand draw leather sheath, designed for horizontal carry. Each Damascus blade is handmade and is unique as a fingerprint in it’s pattern.  The Ottoza Tracker was designed for hunting, camping, tracking, survival, making it a very versatile outdoor knife. The Damascus is made from layers of 1095 and 15n20 steel, and comes sharp and oiled. This knife, while being tough and able to handle most anything you throw at it, is a beautiful piece of art. *1095 & 15n20 (alloy high in Nickel) is a very common Damascus mix, and is very strong and durable, but needs to be cared for to avoid staining and rust.

Read More

SOG – Seal Pup Elite Fixed Blade

Attributes: - - - - - - - - - - - - - -

Specs: blade 4.75”, weighs 5.28 oz, overall 9.5”x1.55”x0.7” Details: Black SOG Pup Elite with partial plain/serrated drop point fixed blade, with high impact textured nylon grip that can serve as a hunting knife, military/combat knife. The blade is full tang, and comes with hard molded Kydex sheath. *SOG’s cryogenic heat treatment gives the steel a superior hardness down to the molecular level and built to last.

Read More

Filters